Loading cartridges, Loading cartridges 32 – HP vs80 User Manual

Page 32

32 Operating the Autoloader

Chapter 2

Figure 13

Exporting a Cartridge

Loading Cartridges

This option loads a cartridge from the autoloader carousel into the tape drive.

To use this option, follow these steps:
1. From the Home Screen or main menu, press the [+] or [-] button until

Commands appears on the top line of the LCD screen. Press [Enter] to

select.

2. Press

the

[+] or [-] button until Load Cartridge appears on the LCD screen.

3. Press

the

[Enter] button to select.

4. Press

the

[+] or [-] button until the desired slot number appears on the LCD

screen and press the [Enter] button. The slot number you select indicates

the cartridge to be loaded into the tape drive.

Note

Only slot numbers that contain cartridges are displayed.

5. Status messages will be displayed while the cartridge is loading. Drive

Stopped will be displayed when the operation is complete.

6. Press

the

[Cancel] button to return to the Home screen when you are done

loading cartridges.