HP 2000 User Manual

Page 54

Text mode
Original mode

Table 10 - Disks Menu Settings

Setting

Parameters

Default

Comment

Disks

Floppy Disk Drive

None
1.44 Mb
2.88 Mb

1.44 Mb

Hard Disk Drive

None
Standard
Custom
Auto-ID

Auto-ID

Select the configuration type of the hard disk.
‘Standard’ selects from a table of older drivers.
‘Custom’ allows manual modification of drive
parameters. ‘Auto-ID’ will attempt to
automatically type an IDE drive. (This screen
also reports # cylinders, # heads, sectors/track,
landing zone, write precomp, type code, and
size).

Input/Output Menu

The input/output menu of the SCU provides an interface to modify serial and parallel port
parameters and other external device settings. See Figure 16 for an example of the password
menu. An explanation of each password option is provided in Table 11.

Figure 16 - Input/Output Menu Screen