HP 2000 User Manual
Page 53
51
Table 9 - Password Menu Settings
Setting
Parameters
Default
Comment
Passwords…
Password option…
Admin Password
required to:
Save modifications to
PC ID texts
Save Setup changes
none selected
Admin Password is required before
proceeding beyond the selected
actions. The Admin Password (if
defined) is ALWAYS required to
save changes to these checkboxes.
User Password
required to:
Turn ON, Always;
Turn ON, after
FN+Suspend;
Undock;
Save Setup changes
none selected
Password is required before
proceeding beyond the selected
actions, and is ALWAYS required
to save changes to these
checkboxes. Admin Password can
be used in place of any User
password.
Disable hard disk
drive lock
2
Selected; Not selected
Not selected.
Check to remove password locking
of the hard disk.
Set Admin password
none
Allows entry of Admin password.
Set User password
none
Allows entry of User password.
Disks Menu
The disks menu of the SCU provides an interface to modify floppy and hard disk drive
parameters. See Figure 15 for an example of the disks menu. An explanation of each disk
parameter is provided in Table 10.
Figure 15 - Disks Menu Screen