HP 4100GL - Manual (Page 17)

Getting Started
Related Publications
Screen Simulations
Figures containing simulated screen text and command output look like this:
Figure 1. Example of a Figure Showing a Simulated Screen
In some cases, brief command-output sequences appear without figure iden­
tification. For example:
HPswitch(config)# clear public-key
HPswitch(config)# show ip client-public-key
show_client_public_key: cannot stat keyfile
Related Publications
Product Notes and Software Update Information. The Read Me First
shipped with your switch provides software update information, product
notes, and other information. A printed copy is shipped with your switch. For
the latest version, refer to “Getting Documentation From the Web” on page
xvii.
Physical Installation and Initial Network Access. Use the Installation
and Getting Started Guide shipped with your switch to prepare for and
perform the physical installation. This guide also steps you through connect­
ing the switch to your network and assigning IP addressing, as well as
describing the LED indications for correct operation and trouble analysis. A
PDF version of this guide is also provided on the Product Documentation CD-
ROM
shipped with the switch. And you can download a copy from the HP
Procurve website. (See “Getting Documentation From the Web” on page xvii.)
General Switch Management and Configuration. Use the Management
and Configuration Guide for information on:
■ Using the command line interface (CLI), Menu interface, and web browser
interface
■ Learning the operation and configuration of all switch software features
other than the access security features included in this guide
■ Troubleshooting software operation
xv