HP 4100GL - Manual (Page 151)

Configuring Port-Based Access Control (802.1x)
Configuring Switch Ports as 802.1x Authenticators
aaa port-access authenticator < port-list > (Syntax Continued)
[ unauth-vid < vlan-id >]
Configures an exsiting static VLAN to be the Unauthorized-
Client VLAN. This enables you to provide a path for clients
without supplicant software to download the software and
begin an authentication session. Refer to “802.1x Open VLAN
Mode” on page 6-20.
[ auth-vid < vid >
Configures an existing, static VLAN to be the Authorized-
Client VLAN. Refer to “802.1x Open VLAN Mode” on page 6-20.
[ initialize ]
On the specified ports, blocks inbound and outbound
traffic and restarts the 802.1x authentication process.
This happens only on ports configured with
control auto
and actively operating as 802.1x authenticators. Note:
If a specified port is configured with
control authorized
and port-security, and the port has learned an autho­
rized address, the port will remove this address and
learn a new one from the first packet it receives.
[ reauthenticate ]
Forces reauthentication (unless the authenticator is
in 'HELD' state).
[ clear-statistics ]
Clears authenticator statistics counters.
6-17