HP BL685C G6 - Manual (Page 39)

Hardware options installation 39
4. Remove the DIMM baffle (on page 18 ).
5. Open the DIMM slot latches.
6. Install the DIMM.
7. Install the DIMM baffle (on page 19 ).
8. Install the access panel (on page 17 ).
9. Install the server blade (" Installing a server blade " on page 29 , " Remove the server blade " on page
16 ).
Solid state drive option
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
IMPORTANT: Installation of SATA SSD drives and hot-plug SAS drives at the same time is not
a supported configuration in this server blade.
To install the component:
1. Power down the server blade (on page 15 ).
2. Remove the server blade (on page 16 ).
3. Remove the access panel (on page 17 ).