HP Vectra VL 5/xxx Series 5 - Manual (Page 16)

16
1 System Overview
Specifications and Characteristic Data
For the minitower models:
When the computer is turned off, but left plugged in at the mains, the power
consumption falls below 5 watts, but is not zero. A small trickle current
continues to flow, supplying power to the CMOS memory, considerably
extending the lifetime of the on-board battery.
If the computer is completely unplugged from the mains, the real time clock
continues to operate, from the charge stored in the battery.
1.
Dependant on operating system and PC configuration
Parameter
Limit for the Power
Supply
Notes
Limit per PCI
Accessory
Slot
Limit per ISA
Accessory
Slot
Input voltage 100-127
Vac
200-240
Vac
Switch selectable
Input voltage range 90-140
Vac
180-264
Vac
Input current (max) 5 A 3 A
Input power (max) 200 W
Input power (typical
1
) < 44 W
< 29 W
< 24 W
< 5 W
Fully-on mode
Standby mode
Suspend mode
Off (but plugged)
— —
Input frequency 45 Hz to 66 Hz
Available power 160 W (continuous) 25 W (max) 7 W (max)
Max current at +5 V 20 A Together, these
two must not
exceed 20 A
4.5 A 4.5 A
Max current at +3.3 V 12 A — —
Max current at -5 V 0.2 A — — 0.1 A
Max current at +12 V 4.4 A — 1.5 A 0.5 A
Max current at -12 V 0.5 A — 0.1 A 0.3 A
Max current at +5 Vst 0.05 A — — —