Electrical specification – HP Vectra VL 5/xxx Series 5 User Manual
Page 15

15
1 System Overview
Specifications and Characteristic Data
Electrical Specification
For the desktop models:
1.
Dependant on operating system and PC configuration
Parameter
Limit for the Power
Supply
Notes
Limit per PCI
Accessory
Slot
Limit per ISA
Accessory
Slot
Input voltage
100-127, 200-240 Vac
Auto-ranging
—
—
Input voltage range
90-264 Vac
—
—
Input current (max)
3 A
—
—
Input power (max)
150 W
—
—
Input power (typical
1
)
< 44 W
< 29 W
< 24 W
< 5 W
Fully-on mode
Standby mode
Suspend mode
Off (but plugged)
—
—
Input frequency
45 Hz to 66 Hz
—
—
Available power
100 W (continuous)
25 W (max)
7 W (max)
Max current at +5 V
13.5 A
Together, these
two must not
exceed 13.5 A
4.5 A
4.5 A
Max current at +3.3 V
6 A
—
—
Max current at -5 V
0.1 A
—
0.1 A
Max current at +12 V
4.5 A
1.5 A
0.5 A
Max current at -12 V
0.3 A
0.1 A
0.3 A
Input power (when
turned Off)
Less than 5 W
When the PC is Off, but still
plugged in, an independent mini
power supply keeps the network
board active enough to watch out
for the “Remote Power-On” (RPO)
signal (see page 71 for
description)
Available power
(when Off)
0.25 W
Available current
(when Off)
0.05 A