Eagle Electronics IntelliMap 640C - Manual (Page 69)

63
Edit Route screen showing Route 1 with waypoints set to normal
navigation (left). Reverse command has been executed (center) revers-
ing the order of waypoints on the route. Pressing Navigate (right) will
allow you to navigate the route from the end to the beginning.
Trails
Delete a Trail
This is the command used to erase or delete a trail.
Press
MENU | MENU |
↓ to
M
Y
T
RAILS
| ENT |
↓ to trail name|
ENT |
→
to
D
ELETE
T
RAIL
| ENT |
← to
Y
ES
| ENT .
To Delete all trails at once
1. Press
MENU | MENU |
↓ to
M Y T RAILS
| ENT .
2. Press
→
to D
ELETE
A
LL
| ENT |
← to
Y
ES
| ENT .
Edit a Trail Name
To edit a trail name press
MENU | MENU |
↓ to
M Y T RAILS
| ENT |
↓ to trail
name| ENT | ENT . Press
↑ or ↓ to change the first character, then press
→ to the next character and repeat until the name is correct. Press
ENT
then EXIT repeatedly to return to the previous page.
Tip:
You can quickly call up the Edit Trail menu by selecting a trail on
the map with the cursor. move the cursor over a trail and a pop-up
box appears. Press
WPT and the Edit Trail menu opens.