Eagle Electronics IntelliMap 640C User Manual

Page 47

You can create a waypoint at the cursor position on the map, or at your
current position while you are navigating. You can create a waypoint at
any location by manually entering the position's latitude and longitude.
You can copy waypoints from your unit to your personal computer with
MapCreate software. When you want to repeat a trip, these archived
waypoints can be reloaded into your GPS unit.

To create and save a Waypoint:
These first two techniques use the Quick Save method, the fastest and
easiest way to create a waypoint.

Create Waypoint at Current Position

While you are traveling, press

WPT

. The waypoint is saved and

automatically given a name with a sequential number, such as "way-
point 003." The waypoint symbol and number appear on the map.

NOTE:

The Quick Save method uses the default waypoint symbol until you
edit an existing waypoint and change its symbol. (Edit Waypoint
Symbol is described in Sec. 4.) After you have changed a waypoint
symbol the unit will remember the one you chose and use it the next
time you "quick save" a waypoint. To revert back to the default
symbol, edit a waypoint and choose the original symbol, or use the
Reset Options command (described in Sec. 5).