Eagle Electronics IntelliMap 640C - Manual (Page 52)

46
The 60-mile zoom figure (left) shows the red course line connecting the
current position to the destination. The Navigation Page (right) will also
show navigation information.
To stop navigating to the cursor, use the Cancel Navigation command.
Press
MENU | MENU |
↓ to
C ANCEL N AVIGATION
| ENT |
← to
Y ES
| ENT . The unit
stops showing navigation information.
Navigate to a Point of Interest
For POIs that are in view on the map, you can easily use the Navigate
to Cursor command above; just use the cursor to select the POI.
The other method involves searching for POIs with the Find Waypoint
command, launched with the
WPT key. (See the searching example ear-
lier in this section, or turn to Sec. 6, Searching, for detailed instructions
on POI searches.)
After you have looked up an item with the Find Waypoint command,
use
← or → to make sure the
G O T O
command is highlighted at the bot-
tom of the screen, then press ENT . The unit begins showing navigation
information to the item.
To cancel navigation, press MENU | MENU |
↓ to
C
ANCEL
N
AVIGATION
| ENT |
←
to Y ES
| ENT . The unit stops showing navigation information.
Creating and Saving a Trail
A trail, or plot trail, is a string of position points plotted by the unit as you
travel. It's a travel history, a record of the path you have taken. Trails are
useful for repeating a journey along the same track. They are particularly
handy when you are trying to retrace your trip and go back the way you
came. On the screen, trails are represented by a solid line extending from
the back of the current position arrow. The default color is light magenta.
The unit is set at the factory to automatically create and record a trail
while the unit is turned on. The unit will continue recording the trail
Course
Line
Active
symbol