Epson R800 - Manual (Page 97)

Solving Problems
97
■ Try turning off PhotoEnhance. Also check if you’re using a special effect that
alters image colors, like Sepia.
■ Change the Gamma setting. See page 23 (Windows) or page 31 (Macintosh).
■ Your printed colors can never exactly match your on-screen colors. However, you
can use a color management system to get as close as possible. See the Photoshop
color management instructions on page 48. If your photos have a green or pink
color cast after using color management, see the solutions on page 56.
Paper Problems
Paper doesn’t eject fully or is wrinkled.
■ If the paper doesn’t eject fully, you may have set the wrong paper size. Press the
) paper button to eject the paper, then select the correct paper size.
■ If it’s wrinkled when it ejects, the paper may be damp or too thin. Load new
paper.
Paper sheets don’t feed correctly.
If paper doesn’t feed or multiple pages feed, remove it from the sheet feeder. Fan the
edges of the sheets, reload them against the right side of the feeder, and slide the left
edge guide against the paper, but not too tightly. Don’t load paper above the arrow on
the left edge guide.
Paper sheets jam in the printer.
Press the ) paper button to eject the jammed paper. If that doesn’t work, try the
following:
1. Turn off the printer.
2. Remove any jammed paper from the printer’s output tray.
3. Push in the output tray extensions and place the output tray in the upper position.
(See page 63 for instructions.)