Epson R800 - Manual (Page 76)

76
Printing on CDs and DVDs
Macintosh 8.6 to 9.x
1. Insert a test CD or DVD for printing, as described on page 63.
2. Start Epson Print CD.
3. Open the File menu and select Page
Setup .
4. Make sure SP R800 appears at the top
of the screen and these settings are
selected:
■ Letter as the Paper Size
■ Manual Feed as the Paper Source
5. Click OK .
6. Open the File menu and select Print.
7. Select CD/DVD as the Media Type setting.
8. Click the Print Density Check Pattern button.
9. Click Print .
10. After the pattern is printed, select
Print from the File menu.
11. Examine the print and select a lighter
or darker Color Correction button as
necessary.
12. You can print three density patterns on
one disc, each in a different location.
Insert the disc again and press the
)
paper button.
13. Repeat steps 9 to 12. Then click Print Density Check Pattern and click the
Second Time button to print the second pattern. If you want to print a third
pattern, repeat steps 9 to 13, but select the Third Time button.
14. Remove the CD or DVD and let it dry for at least 24 hours. Then check the
saturation levels again.