Epson R800 - Manual (Page 16)

16
Loading Paper
Loading Roll Paper
You can load 4-inch and 8.3-inch wide roll paper for printing multiple photos or
panoramics, with or without borders.
Tip: It’s a good idea to check and make sure your ink cartridges are not low
before loading and printing on roll paper. If you need to replace a cartridge with
roll paper loaded, you should remove the paper or marks may appear in
your printout.
1. Turn on the printer and remove any
paper loaded in the sheet feeder at the top
of the printer.
2. Open the output tray, but don’t pull out
the extensions. Also make sure the tray is
in the lower position (see page 13).
3. Place the roll paper on the holders as
shown, then remove the tape and
protective paper from the end of the roll.
4. Make sure the end of the paper is cut
straight across, with 90° corners. If the
end is cut diagonally, you may have
problems feeding the paper.
5. If the paper curls at the end, roll it
backwards between a folded sheet of
paper to uncurl it.
Avoid touching the printable surface of
the roll paper.
90°