Epson Apex 20020 - Manual (Page 107)

To bypass the HELP menu and get information about one
command, follow these steps:
1. At the command prompt, type
HELP,
followed by the
name of the MS-DOS command you want information
about, and press
Enter. For example, to see help
information for the COPY command, type the following
and press Enter:
HELP COPY
2. If there is more than one page of information about the
command you selected, you see the prompt
PgUp
at the
top of the screen. Press PgUp to display the rest of the
text.
3. Press
E
SC
to exit the HELP program.
You can also request help information for more than one
command. Follow these steps:
1. At the command prompt, type
HELP
followed by the
names of the commands you want information about. Then
press
Enter. Separate each command name with a space.
For example, to see help information for the DISKCOPY,
FORMAT, and COPY commands, type the following and
press
Enter:
HELP DISKCOPY FORMAT COPY
2. The help information for the first command is displayed
first. If there is more than one page of information about
the command, you see the prompt PgUp at the top of the
screen. Press PgUp to see more.
3. Press
E
SC
to see the help information for the next
command.
4. To exit the HELP program, press
E
SC
after viewing the
information for the last command.
Using MS-DOS With Your Computer 4-35