Electric oven – Samsung 30 Inch Slide-in Dual Fuel Smart Range Owner Manual User Manual
Page 42
42 English
Elec
tric o
v
en
Electric oven
Language
Select a preferred language from English, French. You can not change the language
during cooking.
1.
Tap and hold
for 3 seconds.
2.
Select
Language
using the dial knob.
3.
Turn the dial knob to select Language and push to save the changes.
Temp. Unit (°F or °C)
Change the temperature format of the oven to Fahrenheit or Centigrade. The
default is Fahrenheit.
1.
Tap and hold
for 3 seconds.
2.
Select
Temperature unit
using the dial knob.
3.
Turn the dial knob to select unit and push to save the changes.
Calibrate Temperature
The oven temperature has been calibrated at the factory. When first using the
oven, follow the recommended recipe times and temperatures. If it appears that
the oven is too hot or too cool, you can recalibrate the oven temperature. Before
recalibrating, test a recipe by using a temperature setting that is higher or lower
than recommended. The baking results should help you decide how much of an
adjustment is needed. The oven temperature can be adjusted by ±35 °F (±19 °C).
1.
Tap and hold
for 3 seconds.
2.
Select
Calibrate Temp
using the dial knob.
3.
Turn the dial knob to adjust temperature value.
4.
Push the dial knob to save the changes.
NOTE
This adjustment does not affect the broiling or the self-cleaning temperature, and
is retained in memory after a power failure.
My Pattern
This function remembers and stores the cook settings frequently used by the user.
1.
Tap and hold
for 3 seconds.
2.
Select
My Pattern
using the dial knob.
3.
Turn the dial knob to select
On/Off
and push to save the changes.
Default Cavity
One cavity will be selected as a default in twin mode when oven turns on.
1.
Tap and hold
for 3 seconds.
2.
Select
Default Cavity
using the dial knob.
3.
Turn the dial knob to select
Upper or Lower
and push to save the changes.
Welcome Lighting
Lighting pattern will be shown on cooktop knobs when the oven display wakes up.
1.
Tap and hold
for 3 sec.
2.
Select
Welcome Lighting
using the dial knob.
3.
Turn the dial knob to select
On/Off
and push to save the change.
Demo mode
This is used by retailers for display purposes only. In this mode, the heating
element does not operate.
1.
Tap and hold
for 3 seconds.
2.
Select
Demo mode
using the dial knob.
3.
Turn the dial knob to select
On/Off
and push to save the changes.
Reset
Reset your oven th its factory default settings. This will erase all data and can't be
recovered.
1.
Tap and hold
for 3 seconds.
2.
Select
Reset
using the dial knob.
3.
Turn the dial knob to select
Cancel/Reset
.
NY63T8751SS_AA_DG68-01218A-00_EN+MES+CFR.indb 42
2020-03-23 6:46:14