Epson 1640XL - Manual (Page 94)

4-28 Using Your Scanner
R4C5460
Rev. C
A5 size USING.FM
12/4/00 Pass 3
L Proof Sign-off:
C.Fujiwara
_______
M.Fujimori _______
J.Hoadley _______
The third, and most precise way to use the document guides is
described below. This method also requires tape.
1. Install the pins in the scanner’s screw holes through the
document guide’s holes. The guide pin screws into the left
hole and the adjust pin screws into the right hole.(See page
4-24)
2. Lay the grid document guide on the document table with the
document guide holes over the screw holes in the scanner.
Make sure the larger document guide hole is on the right
when facing the inside of the cover. (See page 4-24)
3. Open EPSON TWAIN Pro as described in “Starting EPSON
TWAIN Pro” on page 4-6, make the following settings and
click Preview:
Document Source: Flatbed
Image Type: 8-bit Gray (Std)
Destination: LineWork Scan
Resolution: 800 dpi