Epson 1640XL - Manual (Page 27)

2
Setting Up the Scanner 2-5
R4C5460
Rev. C
A5 size SETUP.FM
12/4/00 Pass 3
R Proof Sign-off:
C.Fujiwara
_______
M.Fujimori _______
J.Hoadley _______
Initialization
By observing the scanner's initialization, you can make sure that
the scanner is operating properly before you connect it to your
computer.
1. Open the document cover so you can see the operation of the
scanner during initialization.
2. Turn on the scanner by pressing the
2
OPERATE button.
While the scanner initializes, the fluorescent lamps on the carriage
flash. If the carriage is not at the home position (the left of the
scanner), it moves to the home position.
When the scanner has completed its initialization, the READY
light comes on. If the scanner does not work as described, turn it
off. Make sure that the power cord is firmly plugged in and that
you have released the transportation lock screw, then turn it on
again.
?
Caution:
Whenever you turn off the scanner, wait at least 10 seconds before
turning it back on. Rapidly turning the scanner on and off can
damage the scanner.