Epson 1640XL - Manual (Page 30)

2-8 Setting Up the Scanner
R4C5460
Rev. C
A5 size SETUP.FM
12/4/00 Pass 3
L Proof Sign-off:
C.Fujiwara
_______
M.Fujimori _______
J.Hoadley _______
Setting the SCSI ID number
The scanner's default SCSI ID number is 2.
If you add the scanner to a system in which one of your SCSI
devices already has a SCSI ID of 2, change the ID number to an
unused number using the rotary switch. See the table below as a
guide.
ID Availability Description
0
Not available for Macintosh Used for hard disk
Not recommended for
Windows Usually used for hard disk
1 Not recommended Usually used for hard disk
2 Factory setting of the scanner
3
Not available if your Macintosh
has a built-in CD-ROM
4
5
6
7
Not available for Macintosh Always used for the Macintosh
itself
May not be available for
Windows Usually used for the SCSI board
The SCSI ID rotary switch
is located at the back of
the scanner.