Epson 1640XL - Manual (Page 26)

2-4 Setting Up the Scanner
R4C5460
Rev. C
A5 size SETUP.FM
12/4/00 Pass 3
L Proof Sign-off:
C.Fujiwara
_______
M.Fujimori _______
J.Hoadley _______
Plugging in the Scanner
1. Make sure that the scanner is turned off. The scanner is off
when the
2
OPERATE button is raised.
2. If the power cord is not attached to the scanner, connect it to
the AC inlet on the back of the scanner, and plug the other
end into a properly grounded electrical outlet.
?
Caution:
It is not possible to change the scanner's voltage. If the label on
the back of the scanner does not show the correct voltage for your
location, contact your dealer. Do not plug in the power cord.