Epson ACULASER M8000 series - Manual (Page 202)

Printing in the PCL6/5 Mode Problems
The problems listed in this section are those that you may encounter when printing in the PCL6/
PCL5 mode. All procedural instructions, refer to “About the PCL Printer Driver” on page 226.
The printer does not print
Cause What to do
The Print to file check box is selected in the Print
dialog box. Clear the Print to file check box in the Print dialog box.
The printer does not print correctly in the PCL mode (only for Epson PCL6
printer driver)
Cause What to do
Graphics Mode may be set to Vector and the printing
data may include the data that cannot be printed in
the setting. Access the printer driver, click the Graphics tab, then set the
Graphics Mode to Raster.
The printer does not start manual duplex printing (only for Epson PCL6
printer driver)
Cause What to do
The Print directly to the printer check box is not
selected. Select the Print directly to the printer check box on the Details tab.
The Network port is selected. Change the port to either LPT or USB. The page order for duplex
printing will be corrected.
EPSON AcuLaser M8000 Series User's Guide
Troubleshooting 202