Epson ACULASER M8000 series - Manual (Page 132)

Installing a memory module
w
Warning:
Be careful when working inside the printer as some components are sharp and may cause injury.
c
Caution:
Before you install a memory module, be sure to discharge any static electricity by touching a
grounded piece of metal. Otherwise, you may damage static-sensitive components.
1. Turn the printer off and unplug the power cord and interface cable.
2. Remove the right side cover by removing the screw on the back of the printer and sliding the
cover backward.
EPSON AcuLaser M8000 Series User's Guide
Installing Options 132