Epson ACULASER M8000 series - Manual (Page 92)

Status and Error Messages
This section contains a list of error messages shown on the LCD panel, a brief description of each
message and suggestions for correcting the problem. Note that not every message shown on the LCD
panel indicates a problem. When the mark is displayed at the right of the warning message, multiple
warnings occur. To confirm all warnings that occur, press the d Down button to display the
Status Menu
, then press the r Right button. The LCD panel also displays the remaining service
life of the consumables and available paper sizes.
Bookmark Failed
The selected menu cannot be registered as a bookmark. Some menus cannot be registered as
bookmarks.
Bookmark Registered
The selected menu is registered as a bookmark.
Cancel All Print Job
The printer is canceling all print jobs in the printer memory, including jobs the printer is currently
receiving or printing. This message appears when the + Cancel Job button has been pressed down
for more than 2 seconds.
Cancel Print Job
The printer is canceling the current print job. This message appears when the + Cancel Job button
has been pressed and released within 2 seconds.
Cancel Print Job (by host)
The print job is canceled at the printer driver.
Can’t Print
The print data is deleted because it is incorrect.
Make sure the appropriate paper size and printer driver are used.
Can’t Print Duplex
EPSON AcuLaser M8000 Series User's Guide
Using the Control Panel 92