Epson ACULASER M8000 series - Manual (Page 79)

Buffer Size
Determines the amount of memory to be used for receiving data and printing data. If Maximum is
selected, more memory is allocated for receiving data. If Minimum is selected, more memory is
allocated for printing data.
Note:
❏ To activate Buffer Size settings, you must turn off the printer for more than five seconds then turn
it back on. Or, you can perform a Reset All operation, as explained in “Reset Menu” on page
76.
❏ Resetting the printer erases all print jobs. Make sure the Ready light is not flashing when you reset
the printer.
USB Menu
Item Settings (default in bold)
USB I/F *1 On, Off
USB Speed *1 *2 HS, FS
Get IP Address *2 *3 Auto, PING, Panel
IP *2 *3 *4 *5 0.0.0.1 to 255.255.255.254
SM *2 *3 0.0.0.0 to 255.255.255.255
GW *2 *3 0.0.0.0 to 255.255.255.255
NetWare *2 *3 On, Off
AppleTalk *2 *3 On, Off
MS Network *2 *3 On, Off
Bonjour *2 *3 On, Off
USB Ext I/F Init *2 *3 -
EPSON AcuLaser M8000 Series User's Guide
Using the Control Panel 79