Epson ACULASER M8000 series - Manual (Page 226)

Chapter 10
About the PCL Printer Driver
About the PCL Mode
Hardware requirements
Your printer must meet the following hardware requirements to be able to use the PCL6/PCL5 printer
driver.
Memory requirements for using the PCL6/PCL5 printer driver are shown below. Install optional
memory modules into your printer if the amount of memory currently installed does not meet your
printing needs.
Minimum memory 128 MB *
* Printing may not be possible with this amount of memory, depending on the specifics of the job being printed.
System requirements (only for Epson PCL6 printer driver)
To use the PCL6 printer driver, your computer must be running the following Microsoft Windows
versions and your computer must meet the system requirement of the each operating system.
Supported operating systems Windows Vista/Vista x64
Windows XP/XP x64
Windows Server 2008 x84/Server 2008 x64
Windows Server 2003/Server 2003 x64
Windows 2000
Windows NT 4.0
Windows Me
Windows 98
Windows 95
EPSON AcuLaser M8000 Series User's Guide
About the PCL Printer Driver 226