Edimax Technology ES-5240G+ User Manual

Page 80

4-2-12 Filter

Function name:

Filter Configuration

Function description:

This function can set management’s source IP Address to each port, simple
and raise safety. After completing the function’s setting, press button to
have this function in effect.

Parameter description:

Source IP Filter:

Mode:

There are three types of modes in this drop-down menu. Default is
disabled.

Disabled:

Allow users from all IP address to log in to this switch and manage
it.

Static:

Only the user from the IP Address set by administrator is allowed to
login to this switch and manage it..

DHCP:

Allow the user from an IP Address given by the DHCP server to
login to this switch and manage it.

IP Address:

Setting up the IP Address, it can be one IP Address or a LAN.

IP Mask:

Setting up the IP Subnet Mask necessary for the IP Address.

DHCP Server Allowed:

Just tick the check box (

;)

under the port x to allow the DHCP Server

giving out an IP address; and valid ports are 1~24.

Default: enable