Operation of web-based management – Edimax Technology ES-5240G+ User Manual
Page 52
46
4. Operation of
Web-based Management
This chapter instructs you how to configure and manage the 24-Port GbE
Web Smart Switch through its web user interface and how to access and manage
20 10/100/1000Mbps TP Port and 4 Gigabit TP/SFP Fiber dual media port. The
switch provides 20 fixed Gigabit Ethernet TP ports and four optional Gigabit dual
media ports supporting either fiber or TP media. With this facility, you can easily
access and monitor the statuses of all ports through any one port of the switch,
including MIBs status, activity of each port, multicast traffic, and so on.
The default values of 24-Port GbE Web Smart Switch are listed in the table
below:
IP Address
192.168.1.1
Subnet Mask
255.255.255.0
Default Gateway
192.168.1.254
Password
admin
Table 4-1
After the 24-Port GbE Web Smart Switch being finished configuration, you
can browse it by using the IP address you set up for it. For instance, type
http://192.168.1.1
in the address row in a browser, it will show the following screen
(see Fig.4-1) and ask you to key in password in order to login and access
authentication. The default password is “admin”. For the first time to use, please
enter the default password, then click the
completed.
In the switch, it supports a simple user management function which only
allows one administrator to configure the system at one time.
To optimize and obtain best view on screen, we recommend you use
Microsoft IE and have the resolution set to 1024x768.
Here is the whole function tree of the web user interface and we will go
through it in this chapter.