Epson LABELWRITER SE450 - Manual (Page 54)

Command Reference
GS V Set Print Orientation
Description
Causes the LabelWriter printer to print the data stored in the print buffer and then
change to the selected orientation.
See Also
GS t
Expression
ASCII GS V n
Decimal 29 86 n
Hex 1D 56 n
Parameters
n Specifies the orientation and speed/resolution
n = 0 Portrait 203 x 203 High Speed
n = 1 Landscape 203 x 203 High Speed
n = 2 Landscape 203 x 138 High Speed
n = 4 Landscape 203 x 203 High Resolution
n = 6 Landscape 203 x 138 High Resolution
GS W Set Bar Code Element Width
Description
Selects the horizontal size of a barcode element. The Thin parameter represents the
thickness of the thin bars (in dots). The Thick parameter represents the thickness of the
thick bars (in dots). Each dot measures .0049 inches in 203 dpi and .0073 inches in 138
dpi.
In Code 3 of 9, Interleaved 2 of 5, and Codabar barcodes, the thick bar width is set
according to the Thick parameter; however, all other symbologies ignore the Thick
parameter. The Thin parameter is used by all symbologies.
Expression
48