Epson LABELWRITER SE450 - Manual (Page 52)

Command Reference
GS T Select Line Wrap/Truncate Modes
Description
Determines how to handle a text wrap condition. A text wrap condition occurs when
text extends beyond the end of a line or a page. The default is to wrap at the end of a
line and a page.
Expression
ASCII GS T n
Decimal 29 84 n
Hex 1D 54 n
Parameters
n = 0 truncate in both directions
n = 1 wrap at end of line, but not end of page
n = 2 wrap at end of page, but not end of line
n = 3 wrap at end of line and end of page
GS t Set Characters per Line in Landscape
Description
Creates an internal memory buffer to store landscape text and barcodes until a form feed
is received. The size of the buffer is determined by n, the number of characters per line.
The n parameter is converted internally to millimeters so new line lengths can be
automatically calculated in the event a font change takes place. The conversion to
millimeters is done by multiplying the value of n by the width of whatever font is
currently set when the GS t command is sent.
This command may be used in conjunction with the GS T command to determine
where, if at all, text wraps to the next line.
This command is similar to the GS u command.
See Also
GS u
GS T
Expression
ASCII GS t n
Decimal 29 116 n
Hex 1D 74 n
Parameters
n the desired number of characters per line in landscape mode
46