Esc q set top margin, Esc s set font to 20 cpi, Esc t set font to 7 cpi – Epson LABELWRITER SE450 User Manual
Page 32: Esc q, Esc s, Esc t
Command Reference
ESC Q Set Top Margin
Description
Provided for LabelWriter raster compatibility.
ESC S Set Font to 20 cpi
Description
Changes to the 20 cpi micro font. The cell dimension is 16 H x 10 W.
Fonts may only be changed at the beginning of a line, prior to any printable characters.
This font will remain in effect until the printer is reset (by the ESC @ or ESC *
command) or another font is selected.
See Also
Expression
ASCII
ESC S
Decimal
27 83
Hex
1B 53
Parameters
None
Font
Height
Width
Horizontal
cpi
Vertical cpi
ESC S
16
10
20.3
12.7
ESC P
24
12
16.9
8.4
ESC M
32
16
12.7
6.4
ESC U
32
20
10.2
6.4
ESC T
56
28
7.3
3.6
ESC T Set Font to 7 cpi
Description
Changes to the 7 cpi headline font. The cell dimension is 56 H x 28 W.
26