Ff form feed – Epson LABELWRITER SE450 User Manual
Page 38
Command Reference
16 white pixels
16 printed pixels
Total 192 pixels = 24 bytes x 8
Using the ETB command, along with the ESC D and ESC B commands, can drastically
reduce the number of data bytes required to form a print image. Refer to the description
of the SYN command for more information on printing bitmap data.
See Also
Expression
ASCII
ETB d1…dn
Decimal
23 d1…dn
Hex
17 d1…dn
Parameters
d1…dn
n bytes of bitmap print data as per ESC D setting.
FF Form Feed
Description
Prints the contents of the text buffer and advances the print media. The distance the
media will advance depends on two factors: the feed distance specified by the GS L
command and the presence of a punch hole. The LabelWriter printer will advance until
a punch hole is detected or until the feed distance (specified by the GS L command)
has been reached.
When the printer is powered on, the feed distance stored in flash memory is used as the
default distance; the factory default is 7.5 inches. A new feed distance specified by the
GS L
command will override the flash memory setting until the printer is either
powered down or a reset command is issued (by the ESC @ or ESC * command).
The FF and ESC E commands are the same and produce the same result.
See Also
Expression
ASCII
FF
Decimal
12
Hex
0C
Parameters
32