Epson LABELWRITER SE450 - Manual (Page 36)

Command Reference
This command is used in landscape printing to set a new offset from the top margin
from which to begin printing text and barcode objects. Distance is specified in
millimeters. The LabelWriter SE450 print head is 56 millimeters wide.
Expression
ASCII ESC Y n
Decimal 27 89 n
Hex 1B 59 n
Parameters
n the offset distance in millimeters
ESC y Set 203 x 203 dpi
Description
Provided for LabelWriter raster compatibility.
ESC z Set 136 x 203 dpi
Description
Provided for LabelWriter raster compatibility.
ESC * Reset to Defaults
Description
Returns the printer to its power-up condition, clears all buffers, and resets all character
attributes. The ESC * command is the same as the ESC @ command.
See Also
ESC @
Expression
ASCII ESC *
Decimal ESC 42
Hex ESC 2A
Parameters
None
ESC @ Reset to Power-up Condition
Description
Returns the printer to its power-up condition, clears all buffers, and resets all character
attributes. The ESC @ command is the same as the ESC * command.
30