Epson PhotoPC 3100Z - Manual (Page 37)

Taking Pictures 2-7
R4C7850
Rev. C
A5 size PICTURES.FM
4/27/01 Pass 3
R Proof Sign-off:
K. Pipa CRE Tsutagawa
K. Pipa
CRE R. Hopley
2
5. Hold the camera still until the green indicator
light beside the viewfinder comes back on, or until
the camera makes a clicking sound. Then release
the shutter button.
After you take a picture, the green indicator light
blinks. This signals that the image has been
captured and the camera is processing it. When
the light stops blinking, the image is saved. Saved
images remain in the memory card even when the
camera is turned off, the batteries are removed, or
the memory card is removed from the camera.
When the indicator light next to the viewfinder
stops blinking, the camera is ready to take another
picture.
Using the optical zoom feature
You can capture a smaller portion of the subject at a
higher magnification using the optical (x3) zoom
feature.
Using the optical zoom
Your PhotoPC 3100Z’s optical zoom feature allows
you to increase the magnification of your images by
as much as three times. To use the optical zoom
feature, press the W and T buttons on the back of the
camera under the dial switch. To zoom out, press the
W button. To zoom in, press the T button. You can use
the optical zoom feature at any time when taking
photos.
zoom in
(telephoto) zoom out
(wide)