Denon AVR-A1H 15.4-Channel Network A/V Receiver - Manual (Page 220)

0 When performing Audyssey ® Setup for the first time, the measurement data
is automatically saved to “Speaker Preset 1” of “Speaker Preset”.
0 If Audyssey ® Setup has already been performed, the following “Speaker
Preset” selection screen is displayed.
Audyssey Setup
Back
Select which Preset to use. Preset 1 is already used,
selecting Preset 1 now will overwrite the previously stored
setting.
Speaker Preset 2
Speaker Preset 1
0
See “Speaker Preset” for detailed information on the Speaker Preset
function. ( v p. 254)
13
Select “Details” and press ENTER to verify the
measurement results.
0
Subwoofers may measure a greater reported distance than the
actual distance due to added electrical delay common in
subwoofers.
NOTE
0 Do not enable new speakers in speaker configuration menu after Audyssey ®
Setup. If it is changed, run Audyssey ® Setup again in order to configure the
optimum equalizer settings.
Contents Connections Playback Settings Tips Appendix
220
Front panel Display Rear panel Remote Index