Denon AVR-A1H 15.4-Channel Network A/V Receiver - Manual (Page 103)

o Operations accessible through the option
menu
0
“Tuning in by entering the frequency (Direct Tune)” ( v p. 103)
0
“Changing the tune mode (Tune Mode)” ( v p. 104)
0
“Tuning in to stations and presetting them automatically (Auto Preset
Memory)” ( v p. 104)
0
“Presetting the current broadcast station (Preset
Memory)” ( v p. 105)
0
“Specify a name for the preset broadcast station (Preset
Name)” ( v p. 106)
0
“Skipping preset broadcast stations (Preset Skip)” ( v p. 107)
0
“Adjusting the audibility of dialog and vocals (Dialog
Enhancer)” ( v p. 130)
0
“Adjusting the volume of each channel to match the input source
(Channel Level Adjust)” ( v p. 131)
0
“Adjusting the tone (Tone)” ( v p. 132)
0
“Adjusting audio delay (Audio Delay)” ( v p. 133)
0
“Changing the strength of Tactile Transducer according to the input
source (Tactile Transducer)” ( v p. 134)
0
“Displaying your desired video during audio playback (Video
Select)” ( v p. 135)
0
“Playing the same music in all zones (All Zone Stereo)” ( v p. 136)
0
“Changing the speaker settings to match the listening environment
(Speaker Preset)” ( v p. 137)
Tuning in by entering the frequency
(Direct Tune)
You can enter the receiving frequency directly to tune in.
1
Press OPTION when the input source is “Tuner”.
The option menu screen is displayed.
2
Use cursor Up/Down to select “Direct Tune”, then
press ENTER.
The screen that lets you enter the frequency is displayed.
3
Use cursor Up/Down to select a number, then press
cursor Right.
0
If cursor Left is pressed, the immediately preceding input is
cancelled.
4
Repeat step 3 and enter the frequency of the radio
station you want to hear.
5
When setting is completed, press ENTER.
The preset frequency is tuned in.
Contents Connections Playback Settings Tips Appendix
103
Front panel Display Rear panel Remote Index