Denon AVR-A1H 15.4-Channel Network A/V Receiver - Manual (Page 198)

o Pass Through Source
Selects the HDMI input to pass through the HDMI output when this unit
is in standby power mode.
Last: Selects the last used HDMI input.
CBL/SAT / Media Player /
Blu-ray / Game1 /
Game2 / AUX1 / AUX2 /
TV Audio / CD z
(Default : CBL/SAT):
Selects the HDMI input as the standby
source.
z “Pass Through Source” can be set when any of the HDMI
connectors is assigned to “CD” for the input source in the “Input
Assign” setting. ( v p. 208)
0
“Pass Through Source” can be set when “HDMI Control” is set to “On” or
“HDMI Pass Through” is set to “On”. (“HDMI Pass Through” ( v p. 197),
“HDMI Control” ( v p. 199))
o RC Source Select
Set whether to allow this unit to be turned on by the input source select
button on the remote control when this unit is in standby power mode.
Power On + Source
(Default):
The power of this unit is turned on and
the input source changes.
Source Select Only:
This unit remains in standby but switches
the HDMI input source when you press
an input source button. The power
display of this unit blinks when the input
source select button of the remote control
is pressed.
0 “RC Source Select” can be set when “HDMI Control” is set to “On” or “HDMI
Pass Through” is set to “On”. (“HDMI Pass Through” ( v p. 197), “HDMI
Control” ( v p. 199))
Contents Connections Playback Settings Tips Appendix
198
Front panel Display Rear panel Remote Index