Denon AVR-A1H 15.4-Channel Network A/V Receiver - Manual (Page 213)

Speakers
The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. This is called
“Audyssey
® Setup”.
You do not have to perform Audyssey ® Setup when you have already performed “Speaker Calibration” in “Setup Assistant”.
To set up the speakers manually, use “Manual Setup” on the menu. ( v p. 224)
Audyssey ® Setup
To perform measurement, place the Sound calibration microphone in
multiple locations all around the listening area. For best results, we
recommend you measure in six or more positions, as shown in the
illustration (up to eight positions).
When measuring the second and subsequent positions, install the Sound
calibration microphone within 2 ft (60 cm) of the first measurement position
(main listening position).
0 If you perform Audyssey ® Setup, Audyssey MultEQ ® XT32, Audyssey Dynamic
EQ ® , Audyssey Dynamic Volume ® and Audyssey LFC™ functions are enabled.
( v p. 192)
FL SW C FR
SR SL
Surround speaker (R)
Surround speaker (L)
Subwoofer
Center speaker
Front speaker (R)
Front speaker (L)
( :Measuring positions)
FL
FR
C
SW
SL
SR
Listening position
Contents Connections Playback Settings Tips Appendix
213
Front panel Display Rear panel Remote Index