Denon AVR-A1H 15.4-Channel Network A/V Receiver - Manual (Page 157)

Changing the settings
1
Set the items below to the settings you want to
register.
The following settings from
A
to
K
can be memorized for MAIN
ZONE, and settings
A
and
B
can be memorized for ZONE2 and
ZONE3.
A
Input source ( v p. 88)
B
Volume ( v p. 89)
C
Sound mode ( v p. 138)
D Audyssey (Audyssey MultEQ ® XT32, Audyssey Dynamic EQ ® ,
Audyssey Dynamic Volume ® , Audyssey LFC™) ( v p. 192)
E
“Restorer” ( v p. 190)
F
“Adjusting the volume of each channel to match the input source
(Channel Level Adjust)” ( v p. 131)
G
“Displaying your desired video during audio playback (Video
Select)” ( v p. 135)
H
“All Zone Stereo” ( v p. 136)
I
“Speaker Preset” ( v p. 137)
J
“HDMI Video Output” ( v p. 202)
K
“TV Audio sharing settings” ( v p. 158)
0 Press and hold QUICK SELECT while a radio station is being received is
being played back with any of the following sources, the current radio
station is memorized.
0
Tuner / Internet Radio Station / Spotify
2
Press MAIN, ZONE2 or ZONE3 to select the operating
zone with the remote control.
The button for the selected zone is lit.
3
Press and hold the desired QUICK SELECT until
“Quick z Memory”, “Z2 Quick z Memory” or “Z3 Quick z
Memory” appears on the display.
The current settings will be memorized.
z is displayed the number for the QUICK SELECT button you
pressed.
o Changing the Quick Select Name
The MAIN ZONE Quick Select name displayed on the TV screen or
display of this unit can be changed to a different name.
For the name change method, see “Quick Select Names”.
( v p. 271)
Contents Connections Playback Settings Tips Appendix
157
Front panel Display Rear panel Remote Index