Epson 2100Z - Manual (Page 74)

R4C7770
User’s Guide
Rev. D
PLAYBACK.FM A6 size
L Proof Sign-off:
K. Pipa DAI M. Takata
K. Pipa
DAI K. Ramsey
- 62 -
❏ The brightness of the image on the LCD monitor changes
when you change the brightness setting. This
approximates the effect the setting will have when printed
by a printer that supports the PRINT Image Matching
system.
Resetting the number of prints to zero
If you have specified a number of prints for one of more
photos in the camera’s memory card, you can reset the
number of prints to zero for individual photos, or for all
photos at once.
See the appropriate section below for instructions.
1. Press the button. The last photo you took appears on
the LCD monitor.
2. Select the photo you want to make brightness settings for
using the button. To select the next photo, press T.
For the previous photo, press W.
3. Press the button
repeatedly until the red
frame appears around the
icon.
4. Press the button to make the setting. The icon
appears at the top of the LCD monitor.
Note:
To cancel this setting, press the
button again.
Select this
icon with the
red frame.