Setting the time and date for the first time – Epson 2100Z User Manual
Page 34
R4C7770
User’s Guide
Rev. D
START.FM
A6 size
L
Proof Sign-off:
K. Pipa DAI M. Takata
K. Pipa
DAI K. Ramsey
- 22 -
❏ When the
,
, and
icons appear in turn, all buttons are
disabled.
❏ Battery life varies depending on battery type and manufacturer.
❏ If you use rechargeable Ni-MH batteries in the PhotoPC 2100Z,
make sure that all four batteries are fully charged when you
replace them. If you find that your batteries run out soon after
recharging them a number of times, make sure that you
discharge the batteries completely before recharging them.
❏ Ni-MH rechargeable batteries with a battery charger can be
purchased from EPSON.
Now you are ready to turn on the camera.
Setting the time and date for the first time
Follow the steps below to set the time and date the first time
you turn on the camera.
Note:
❏ If you remove the batteries from the camera, the time and date
settings will be erased after approximately four days (after using
the camera for at least one day).
❏ If the time and date settings are erased, the date and time appear
on the LCD monitor as shown in step 2 below. Follow the
instructions from step 2 to make the settings again.