Setting the flash – Epson 2100Z User Manual

Page 61

- 49 -

R4C7770
User’s Guide
Rev. D

PICTURES.FM

A6 size

Proof Sign-off:
K. Pipa DAI M. Takata
K. Pipa
DAI K. Ramsey

king

ture

After you take the picture, the LCD monitor comes on
momentarily, displaying the picture you just took, and

appears on the bottom left of the LCD monitor. At this
time, you can specify the number of prints by pressing the

print button. To take another picture, press the function

button, then repeat steps 4 through 6.

Note:
❏ For more information on specifying the number of prints,

❏ After you are finished taking pictures, you can view the

pictures you took, delete them, and make print settings. See
Chapter 3 “Viewing and Managing Your Photos”.

Setting the flash

You can choose between three flash functions: Flash Auto,
Flash Off, and Red-eye Reduction. To change the setting,
follow the steps below.

1. Turn on the camera by sliding the OPEN switch to open

the lens cover.

Note:
For more information on turning on the camera, see “Turning
the camera on and off” on page 27.