Canon EOS R6 Mark II Mirrorless Camera with 24-105mm f/4-7.1 Lens - Manual (Page 533)

Orientation-linked AF points
You can set separate AF areas/points or separate AF point positions for vertical and
horizontal shooting.
[ ] Same for both vert/horiz
The same AF points or Zone AF frames in the same AF areas are used in both vertical
and horizontal shooting.
[ ] Separate AF pts: Area+pt
Separate types of AF areas or separate AF points or Zone AF frames can be set for
each camera orientation ((1) Horizontal, (2) Vertical with the camera grip up, (3) Vertical
with the camera grip down (
)).
Useful when switching to other types of AF areas or positions of AF points or Zone AF
frames automatically based on camera orientation.
AF areas and AF points or Zone AF frames you assign to each of the three camera
orientations are retained.
[ ] Separate AF pts: Pt only
Separate AF points or Zone AF frames can be set for each camera orientation ((1)
Horizontal, (2) Vertical with the camera grip up, (3) Vertical with the camera grip down).
Useful when switching to other positions of AF points or Zone AF frames automatically
based on camera orientation.
Positions of AF points or Zone AF frames you assign to each of the three camera
orientations are retained.
Caution
The default setting of [ Same for both vert/horiz ] is restored if you select [ Basic
settings ] in [ : Reset camera ] ( ). Settings for orientations (1)–(3) are cleared,
and the selected AF area option becomes [ Whole area AF ].
The setting may be cleared if you switch lenses.
533