Canon EOS R6 Mark II Mirrorless Camera with 24-105mm f/4-7.1 Lens - Manual (Page 106)

Creative Assist effects
[ ] Preset
Select one of the preset effects.
Note that [
Saturation ], [ Color tone 1 ], and [ Color tone 2 ] are not available with [ B&W ].
[ ] Background blur
Adjust background blur. Choose higher values to make backgrounds sharper. To blur
the background, choose lower values. [
Auto ] adjusts background blurring to match the
brightness. Depending on lens brightness (f/number), some positions may not be
available.
[ ] Brightness
Adjust image brightness.
[ ] Contrast
Adjust contrast.
[ ] Saturation
Adjust the vividness of colors.
[ ] Color tone 1
Adjust amber/blue color tone.
[ ] Color tone 2
Adjust green/magenta color tone.
[ ] Monochrome
Set the toning effect for monochrome shooting.
Note
[ Background blur ] is not available in flash photography.
These settings are reset when you switch shooting modes or set the power switch
to <
>. To save the settings, set [ : Retain Creative Assist data ] to
[ Enable ].
Saving effects
To save the current setting to the camera, tap [ Register ] on the [ Creative Assist ]
setting screen, then select [ OK ]. Up to three presets can be saved as [ USER *]. After three
have been saved, an existing [ USER *] preset must be overwritten to save a new one.
106