Barco F80-4K9 9000-Lumen 4K UHD DLP Laser Projector (No Lens) - Manual (Page 75)

75 R5906852 /09 F80
7.7 Setting the output resolution
Setting the output resolution is limited to F80-4K7, F80-4K9 and F80-4K12 projectors. This settings
is not available for F80-Q7, F80-Q9 and F80-Q12 version.
How to choose the output resolution
1. In the main menu, select Image → Advanced → Output resolution .
Image 7–30 Advanced settings menu, Output resolution
Tip: The current active output resolution is indicated at the bottom of the selection button.
The Output resolution menu is displayed.
Image 7–31 Example of the available output resolutions
2. Select the desired output resolution. You can choose either:
•
4K-UHD : 4k images in Ultra-High Definition (UHD).
• WQXGA : 2k images in WQXGA mode.
7.8 BrilliantColor TM
About BrilliantColor TM
The BrilliantColor TM mode has an effect on the color rendering.
With BrilliantColor TM mode set to Off , only primary colors are generated by the light source. In Native and
Video mode, a secondary color is added (C1). This has the effect of increasing the color intensity, and by that
also the perceived light intensity.
How to select the BrilliantColor TM mode
1. In the main menu, select Image → Advanced → BrilliantColor TM .
GUI – Image