Barco F80-4K9 9000-Lumen 4K UHD DLP Laser Projector (No Lens) - Manual (Page 67)

67 R5906852 /09 F80
Image 7–10 Image menu – Gamma
2. Use the ▼ key to select the slider.
3. Use the ◄ or ► key to change the gamma value between 1.0 and 2.8 . The default value is 2,2.
Tip: The slider can be adjusted with a precision of 0.1.
Image 7–11 Example of the gamma menu
7.4 Setting the desired Gamma type
About the alternate gamma types
Next to the standard gamma correction, the projectors can be manipulated in a way to simulate gamma types
for other devices or purposes. This includes sRGB (standard Red-Green-Blue), Power gamma, DICOM
gamma ranges and for simulation projectors sim1.
DICOM gamma ranges are usually reserved for medical displays. While this projector is not a certified DICOM
display, it can simulate certain specific DICOM gammas at a few selected max light outputs. The DICOM
gamma assumes that both ambient light and the projector outputs black as 0 cd/m². Then there will be a few
predefined gamma curves at the following light outputs:
• DICOM 10: 10 cd/m²
• DICOM 60: 60 cd/m²
• DICOM 180: 180 cd/m²
• DICOM 250: 250 cd/m²
• DICOM 300: 300 cd/m²
• DICOM 400: 400 cd/m²
This is the full list. Take into account that the available DICOM gamma types for your projector type
may be more limited than this list.
Exception when using an HDR source
The only alternate color gamma that can not be selected in this menu is PQ/HDR. Because the color output of
HDR is dependant on extra factors such as screen luminance, a separate menu has been made available for
this (PQ).
GUI – Image