Barco F80-4K9 9000-Lumen 4K UHD DLP Laser Projector (No Lens) - Manual (Page 111)

111 R5906852 /09 F80
CLO can not be used when the light source is off, the shutter is closed or if the Dynamic Black
feature is active (if available).
How to reduce the power
1. In the main menu, select Installation → Illumination .
Image 8–76 Installation menu, illumination
The Illumination menu is displayed.
Image 8–77 Example of the Illumination menu
2. Use the Slider to change the power value.
3. Enable the Constant light output slider if you want to enable CLO mode.
4. If CLO mode is active, you can use the CLO Scale slider to scale the light output.
8.12 3D projection
3D setup
The projector is capable of displaying 3D images and movies in active stereoscopic 3D.
Setup of a 3D installation requires an advanced understanding of 3D systems, both for the projector as well as
for the system the signal source originates from. In a 3D setup it is crucial that the projected images are
perfectly synchronized through the whole signal path, from the signal source to the picture viewed through the
3D goggles.
Regarding setting up the proper signal source, please refer to the user manual or online help for that graphic
card. For example: when using NVIDIA Quadro cards, use the NVIDIA Control Panel to manage your 3D
settings.
8.12.1 Active Stereo & Passive Stereo
What is Passive Stereo?
Passive Stereoscopic 3D (also known as “Passive Stereo”) is the standard method of creating the illusion of
depth in an image, by means of stereopsis for binocular vision.
GUI – Installation