2 projector air inlets and outlets, 3 local keypad and lcd panel, Projector air inlets and outlets – Barco F80-4K9 9000-Lumen 4K UHD DLP Laser Projector (No Lens) User Manual
Page 25: Local keypad and lcd panel, Air inlets and outlets, Overview, Local keypad, Lcd panel
25
R5906852 /09
F80
2.2 Projector air inlets and outlets
Air inlets and outlets
Image 2–3
The F80 has 1 air inlet channel and 1 air outlet. The air outlet is located at the right side of the projector. The
air inlet is located at the left side of the projector.
2.3 Local Keypad and LCD panel
Overview
1
2
3
4
5
6
10
11
9
8
7
Image 2–4
1
Menu navigation
2
Menu confirmation, OK button
3
Menu open / close
4
Menu back
5
Power on / off
6
Project OSD on / off
7
Input selection
8
Shutter open / close
9
Test patterns
10
Lens adjustment
11
LCD panel
Local Keypad
The Keypad gives direct access to several functions, in addition to access to the menu system.
The keypad has a backlight that can be switched on and off manually. By default the light turns off after 5
minutes.
The Power button and Shutter buttons are equipped with white, blue and red backlit LEDs. The other keys are
only equipped with white and blue backlit LEDs. The LEDs are controlled according to the features available.
LCD panel
The LCD panel has two main functions:
1. Showing the menus, the adjustment information and also a mirror of the OSD, (On Screen Display)
described in
User Interface
when this is enabled.