Creating folders, Setting up the printer to fax, Setting up the fax function – Lexmark MC3224dwe Multifunction Color Laser Printer User Manual
Page 24
•
For SMB, type the network folder address. For example,
myServer/myShare/myFile.pdf
. Type the
network domain name.
•
If necessary, select the Authentication type for FTP and SMB.
To limit access to the bookmark, enter a PIN.
Note:
The application supports the following file types: PDF, JPEG, TIFF, and HTML-based web pages.
Other file types such as DOCX and XLXS are supported in some printer models.
4
Click
Save
.
Creating folders
1
Open a web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
2
Click
Bookmarks
>
Add Folder
, and then type a folder name.
Note:
To limit access to the folder, enter a PIN.
3
Click
Save
.
Note:
You can create folders or bookmarks inside a folder. To create a bookmark, see
.
Setting up the printer to fax
Setting up the fax function
Notes:
•
Some connection methods are applicable only in some countries or regions.
•
If the fax function is enabled and not fully set up, then the indicator light may blink red.
•
If you do not have a TCP/IP environment, then use the control panel to set up fax.
Warning—Potential Damage:
To avoid loss of data or printer malfunction, do not touch cables or the printer
in the area shown while actively sending or receiving a fax.
Set up, install, and configure
24