Canon PIXMA G5020 Wireless MegaTank Printer - Manual (Page 210)

• To register the current settings as a new preset, click Save... under Commonly Used Settings .
Note
• If the paper settings in the printer driver differ from the paper information registered on the printer, an
error may occur. For instructions on what to do if an error occurs, see " Paper Settings ."
To check the current printer settings or to apply the printer settings to the printer driver, display the
Quick Setup tab, click Printer Media Information... , and specify the settings in the dialog box that
appears.
For details about the paper information to be registered on the printer, see the following:
• Paper Settings on the Printer Driver and the Printer (Media Type)
• Paper Settings on the Printer Driver and the Printer (Paper Size)
Checking Printer Settings and Applying Settings to Printer Driver
1. Open printer driver setup window
2. On Quick Setup tab, click Printer Media Information...
The Printer Media Information dialog box appears.
3. Select Paper Source
From Paper Source , check the setting or select a new paper source.
The current printer settings appear in Media Type and Page Size .
4. Apply settings
To apply the printer settings to the printer driver, click Set .
Note
• If the Type on the printer is set to IJ Hagaki, Hagaki K, or Hagaki, or if the Page size on the
printer is set to 2L/5"x7", click Set to display the dialog box.
Select the media type and paper size that match your purpose, and then click OK .
• If the Type and the Page size on the printer are not set or are set to Others, Set will be grayed
out and cannot be clicked.
• If communication with the printer is disabled, the Printer Media Information... dialog box will
not appear or the printer driver will not be able to obtain printer media information.
210