Canon PIXMA G5020 Wireless MegaTank Printer - Manual (Page 180)

Note
• You cannot use the same printer name as that already used for other LAN connected devices.
• You cannot use a hyphen for the initial or last character of the printer name.
• TCP/IP settings
Performs IPv4 or IPv6 setting.
• WSD setting
Setting items when you use WSD (one of the network protocols supported in Windows).
◦ Enable/disable WSD
Selects whether WSD is enabled or disabled.
Note
• When this setting is enabled, the printer icon is displayed on the Network Explorer in
Windows.
◦ Optimize WSD-In
Selecting Enable allows you to receive the WSD printing data faster.
◦ Timeout setting
Specifies the timeout length.
• Bonjour settings
Setting items when you use Bonjour.
◦ Enab./disab. Bonjour
Selecting Enable allows you to use Bonjour to perform the network settings.
◦ Enter service name
Specifies the Bonjour service name. You can use up to 48 characters for the name.
Note
• You cannot use the same service name as that already used for other LAN connected
devices.
• LPR setting
Enables/disables the LPR setting.
• RAW protocol
Enables/disables RAW printing.
• LLMNR
Enables/disables LLMNR (Link-Local Multicast Name Resolution). Selecting Enable allows the printer
to detect printer's IP address from the printer name without a DNS server.
• IPP settings
Selecting Enable allows you to print via the network with the IPP protocol.
• PictBridge commun.
180